DJI Mini 2 Drone Body Replacement

ID: 149681

Description: We are defining the DJI Mini 2 drone body as...

Steps:

1. Face the DJI Mini 2 away from you so that you are looking at the charging ports.
2. Use your finger to open up the back panel.

3. Pinch the locking mechanism on the battery to release the lock.
4. Pull the battery straight out of the compartment.

5. Unfold the wings of the drone.
6. Place the drone upside down on a flat surface.
7. There should be stickers on the device telling you how to unfold the propeller arms.

8. Remove the four 5 mm J000 screws near each propeller arm.

9. Flip the drone back over.
10. Use a combination of the opening tool and your fingers to pry open the top panel of the drone along the seams.

11. Remove the two 5 mm J000 screws located in the battery hatch and near the ports on the back of the drone.

12. Flip the drone over again.
13. Pry off the bottom panel of the drone using the opening tools and your fingers.