Upper Component Bracket Removal

ID: 151305

Description: This is a prerequisite-only guide! This guide...

Steps:

1. Carefully peel the LCD buffer tape from the upper component bracket.

2. Use a Phillips #00 screwdriver to remove the five screws securing the the upper component bracket:
3. Three 1.4 mm-long screws
4. Two 1.9 mm-long screws

5. Use the pointed end of a spudger to lift up the upper component bracket until you can grip it with your fingers.

6. Use your fingers to peel the upper component bracket away from the tape.
7. Remove the upper component bracket.