Nespresso U inner coffee spout replacement

ID: 152071

Description: If the coffee no longer comes out of the spout...

Steps:

1. Insert an opening tool into the gap between the coffee spout and the side panel on the right side. Push the side panel away a few millimeters and push the tool down until the side panel at the front edge comes loose with a loud crack
2. Repeat on the left side.

3. Push the side parts apart at the top.
4. Lift out the coffee spout, it is held in place by detents.

5. Plug in the connector and turn on the machine.
6. Push the slider for the capsule forward until the motor moves the brewing unit forward, when it is half way, then gently push the slider back so that the brewing unit stops half way.
7. Pull the power plug.

8. Now you can lift out the defective inner coffee spout. Its retaining tabs are probably broken off, so this should be quite easy.

9. The two broken tabs are clearly visible. In the second picture, the old and the new part are next to each other.

10. Take the opportunity to clean the spout rocker and all internal parts.

11. Press firmly on the new coffee spout.

12. The broken upper flap is still present here. Lift it out with tweezers.