Digital Caliper Teardown

ID: 152711

Description:

Steps:

1. Slide the battery compartment open.
2. Pull out the battery.

3. Remove the sticker and place it on a clean sticker-friendly surface.
4. Screw out the 9-mm screws using the J0 Bit.

5. Screw out the 4-mm screws holding the PCB in place. Use the J000 bit.
6. Now take out all the parts from the housing.

7. Remove the right/bottom 6mm screws.
8. Then the last 2 and the tightener screws. So you can pull it apart.