Bosch IXO (2 Gen) Battery Replacement

ID: 152908

Description: Here we show how to replace the battery in the...

Steps:

1. Loosen 4 screws size Torx T10. The screw size is identical for all four screws.
2. All four screws are the same length.

3. Loosen the nameplate on the bottom of the screwdriver and set it aside so that the right housing part can be removed in the next step.

4. The housing halves now lie loosely on top of each other. Lift the right housing half upwards and set it aside.
5. It may be that the two halves of the case stick together quite strongly due to the gasket in between. Then shake it delicately and pull vigorously. :)

6. The green battery can be found in the red border.
7. The battery is labeled with: INR18650-13P SAMSUNG SDI 076
8. You can find it for example at Amazon or eBay, if you search for "Samsung 18650 13P solder tag

9. Heat the cables at both pole ends with a soldering iron and detach them.
10. In this tutorial, you will learn how to solder and desolder.
11. Please dispose of the battery properly at local disposal points.

12. Connect the side of the new battery with the white ring (positive pole +) to the red cable. Solder the blue cable to the other side (without the white ring).