BOSCH MUM7000 replace torn belt

ID: 153170

Description: The motor in the machine starts, but nothing...

Steps:

1. Open 4 cross screws
2. Loosen some plastic latches
3. Simply "pull off" the knob while or before opening the housing

4. Loosen screw
5. Turn back the plastic-tensioner so that the gear seperates from the rest

6. Pull the black cap off the axle
7. Flip the longer belt over the pulley
8. Unscrew 3 screws to remove the plastic cover

9. Lever out the clamps to remove the axle and take out the belts
10. Remove the clutch / gearbox

11. Insert new belts with the axle
12. Tension the 3M belts and reassemble everything
13. The rotation of the 5M belt determines the running direction! Do it as in the picture, so that this is correct.