HP EliteBook 835 G7 Battery Replacement

ID: 154778

Description: Use this guide to replace the battery in your...

Steps:

1. Completely power off and unplug your EliteBook before you start. Close the display and flip the entire laptop upside-down.
2. Use a Phillips screwdriver to loosen the five captive screws from the lower case.

3. Insert an opening pick between the lower case and the chassis along the hinge edge.
4. Slide the opening pick around the right corner and halfway up the side of the EliteBook to release the clips securing the lower case.

5. Repeat the previous step on the left side of the case to release the clips.

6. Lift the lower case up and away from the EliteBook and remove it.

7. Move the pull tab that covers the battery connector out of the way.
8. You can use a piece of tape to hold the pull tab out of the way.

9. Use the pointed end of a spudger to push each side of the battery connector until it comes out of the socket.

10. Use a spudger, or your fingers, to separate the speaker cable from its plastic recess.
11. Repeat for the two other plastic recesses.

12. Use a Phillips screwdriver to remove the four 4.5 mm-long screws securing the battery.

13. Tilt the top of the battery upward to release its plastic clips.
14. Remove the battery.