Dyson Supersonic HD01 Buttons Replacement

ID: 154867

Description: This guide shows how to replace the power...

Steps:

  1. Heat the iOpener in the microwave for 30 seconds and apply it immediately to the top of the buttons.
  2. Leave the iOpener in place for a couple minutes.
    3. Step image Step image
  3. Remove the buttons with tweezers.
  4. Power button
  5. Cold shot button
  6. Use a microfiber towel soaked in rubbing alcohol to clean the button holes. Doing this will loosen the buttons if jammed.
    7. Step image Step image Step image
Back