Samsung Galaxy Book Pro 360 15" Rubber Feet Replacement

ID: 154962

Description: Use this guide to replace the rubber feet in...

Steps:

1. Before you begin, shut down your laptop and unplug it.
2. Close the screen and lay your laptop down with the rear case facing up to access the four rubber feet.

3. Insert an opening pick between the rear case and the rubber foot.
4. Pry up with the pick and dislodge the foot from the rear case.
5. Use tweezers or your fingers to remove the rubber foot.
6. Repeat this process on the remaining rubber feet.
7. There are two types of rubber feet for this laptop. During reassembly, make sure the top feet say "M4" and the bottom feet say "M1".
8. To reinstall a rubber foot, align it over the recess and push down until it's secured.