eufy RoboVac 11 Wheel and Wheel Motor Replacement

ID: 155018

Description: If your eufy RoboVac 11 is having trouble...

Steps:

1. Remove the nine 10 mm screws with the Phillips #1 precision screwdriver.
2. Keep track of these screws. They are the same length as the interior screws but wider in diameter.

3. Remove the six 7 mm screws on the bumper with the Phillips #1 screwdriver.

4. Remove the top plate from the body of the device.
5. Unplug the bumper from the motherboard.

6. Remove the three 10 mm motherboard screws with a Phillips #1 screwdriver.
7. Cleaning the motherboard and inside of the device outdoors with a compressed air cleaner will help the robot last longer.

8. Unplug the cables from the motherboard.

9. Remove the single 10 mm screw with the Phillips #1 screwdriver.
10. Remove the rolling brush.

11. Remove the wheels.
12. The removal of the two wheels is the same on both sides, but on the left side there is a motor in the way of the wheels.
13. Remove the single 10 mm screw with the Phillips #1 screwdriver and then pull upwards to remove the piece preventing removal.

14. Remove the three 10 mm screws with the Phillips #1 screwdriver.
15. Remove motors.
16. The process for removing the left and right motors is the same.