eufy RoboVac 11 Side Brush Replacement

ID: 155127

Description: If your eufy RoboVac 11's side brushes are...

Steps:

1. Remove the nine 10 mm screws with the Phillips #1 precision screwdriver.
2. Keep track of these screws. They are the same length as the interior screws but wider in diameter.

3. Remove the six 7 mm screws on the bumper with the Phillips #1 screwdriver.

4. Remove the top plate from the body of the device.
5. Unplug the bumper from the motherboard.

6. Remove the three 10 mm motherboard screws with a Phillips #1 screwdriver.
7. Cleaning the motherboard and inside of the device outdoors with a compressed air cleaner will help the robot last longer.

8. Unplug the cables from the motherboard.

9. Remove the 10 mm side brush motor screws with the Phillips #1 screwdriver.
10. Remove the side brushes.
11. Remove the side brush motors.