HP 14-fq1025nr Fan Replacement

ID: 155128

Description: In this guide, you will learn how to remove a...

Steps:

1. Flip the laptop upside down so the bottom cover is facing up.

2. Use a pair of tweezers to grab and pull the feet off of the cover.

3. Remove the two 4 mm screws using a Phillips #0 screwdriver.
4. Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

5. Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

6. Remove the bottom cover.

7. Remove the three silver screws (one 2 mm screw and two 4 mm screws) holding down the fan using a Phillips #0 screwdriver.

8. Unplug the fan’s power cord from the motherboard.
9. Use tweezers to pull the plug out, if needed.

10. Remove the fan.