Amazon Echo Studio Power Supply Board Replacement

ID: 155371

Description: If your Amazon Echo Studio does not power on,...

Steps:

1. Flip the device upside down.
2. Pry up the edge of the rubber base panel with a spudger, then pull the rest of it off by hand.

3. Use a T15 Torx screwdriver to remove the nine 3.2 mm screws.
4. Use a Torx T10 screwdriver to remove the six 2.7 mm screws.
5. After removing the screws, gently lift the base off, with care not to damage any of the connected cables.

6. Before fully removing the base, remove the three attached connectors.

7. Now unscrew the the single 10 mm Phillips screw.
8. Remove the power supply board.