HP EliteBook 820 G3 Hard Drive Replacement

ID: 155408

Description: This guide will show you how to replace the...

Steps:

1. Remove the eleven 3 mm screws with a Phillips #00 screwdriver.
2. Keep track of where the screw covers were attached to as there are four different sizes.

3. Remove the SD card blank and the single 3 mm screw beneath it using a Phillips #00 screwdriver.
4. Lift off the back cover with your hands.

5. Remove the four 3 mm screws from the hard drive using a Phillips #00 screwdriver.

6. Slide the hard drive away from the system board connector to disconnect the hard drive from the system board.
7. Place it in a static dissipative bag.