Epson Home Cinema 1060 Bulb Replacement

ID: 155544

Description: If your device is on and there is no light...

Steps:

1. Remove the screw from the corner panel that houses the bulb chamber using a Phillips #0 screwdriver.
2. Slide off the panel by pulling it away from the machine.

3. Remove the two screws from the top of the black casing using a Phillips #0 screwdriver.
4. Pull the casing out of its chamber.

5. Remove the four screws from the bottom of the casing using a Phillips #0 screwdriver.

6. Remove the top and side of the casing from the bulb.

7. Remove the old light build and replace it with your new one.