Logitech G29 Steering Wheel Motherboard Replacement

ID: 155670

Description: This guide shows how to replace the motherboard...

Steps:

1. Remove the six 32mm long 4mm Allen screws from the faceplate of the steering wheel

2. Remove the six 10mm long #00 Phillips head screws from the back of the steering wheel. Rotate the steering wheel 60 degrees per screw until all 6 screws are removed.
3. Gently lift the steering wheel off the steering column

4. Gently unplug the wiring harness from the circuit board.

5. Remove the 6 10mm long #00 Philips head screws that hold the circuit board to the steering wheel.

6. Remove the two 8mm long #00 Philips head screws holding the smaller circuit board onto the steering wheel.

7. Gently lift the circuit board off the steering wheel. replace the circuit board with the new part.

8. The replacement part should match this image. All buttons on the steering wheel are included on this circuit board.