Fujitsu Lifebook E546 RAM Modules Replacement

ID: 157542

Description: Hello! In this guide I will show you how to...

Steps:

1. Before doing something, always remove the battery!
2. First, gently pull down and hold that little tab down (1) to unlock the second tab.
3. Then move left the second tab (2). Both tabs should be secured in OPEN position.
4. Now you can pull battery out by simply lifting it by that notch (3).

5. To remove RAM modules cover, just undo one screw (highlited in photo). Then lift cover by notch next to the screw hole.

6. Now you can see you RAM modules bay. RAM stick is held by two clips - one at each side.
7. Gently pull the tabs outwards. Released RAM stick should pop-up upwards to certain angle.
8. Gently remove RAM stick. To insert a new stick, push it into slot at an angle. Make sure it is evenly seated, then push it down until clips will secure it.