How to Get Dents Out of Wood

ID: 157784

Description: Today wood is expensive, so replacing dented or...

Steps:

1. Fill a medium-sized bowl with room-temperature water.
2. Dip a hand towel into the bowl of water.
3. Wring the hand towel out a bit until it is damp rather than dripping wet.

4. In the wood surface, find the dent you wish to remove.
5. Place the damp hand towel over the dented area as flat as possible.

6. Set your flat iron to its highest setting.
7. Do NOT touch the metal part of the flat iron while it is on.

8. Firmly press the flat iron down on the damp hand towel.
9. While pressing down, move the iron in circular or back and forth motions.

10. Continue the circular or back and forth motions until the hand towel is dry.

11. Repeat steps 1-5 until the dent is gone.
12. Turn off the flat iron after finishing.
13. Be sure to allow time for the iron to cool down after turning it off. Do NOT touch the metal or place it face down during this time.