HP Compaq 6000 Small Form Factor Teardown

ID: 157884

Description:

Steps:

  1. Use the latch on the side panel to open it
  2. Make sure you open the panel, pulling up and pulling towards your self as shown in the pictures
  3. Removing drives is easy, just pull the drive bay up and you can access them
  4. Fallow the next step if your hard drive is the OEM hard drive, it has a different placement (under the power supply.
  5. Be carful around the SATA cables so you don't cut them!!!
  6. You may now remove / replace any disks in the shown area
  7. Lift the power supply up in the direction of the green arrow
  8. Remember !!!!ALWAYS UNPLUG YOUR DEVICE BEFORE OPENING!!!!!!!
  9. Just disconnect the cables going to the floppy, cd/dvd, and hard drive. (: Great Job so far
  10. Be carful around wires (Don't cut or damage)
  11. Just go slow and take your time (;
  12. CAUTION (There are 2 screws on both sides of the DVD/CD drive)
Back