How to Replace the Lightbulbs in a Whirlpool WMH31017HB

ID: 158326

Description: If the light bulb inside the hood of your...

Steps:

1. Ensure the underside of the hood is clean, and that there is no oil on it.
2. To remove built-up grease, you can use dish soap and a sponge.
3. Make sure there is no food on the stove.
4. Have the range hood lights on, as you need to be able to see everything.

5. Gently unscrew and open the hood panel that is covering the lights with a screwdriver.

6. Slowly pull down the lid of the light box.
7. Beware of any shattered light bulbs. To be safe, place a newspaper or a towel under, on the stove. As this catches all the glass and prevents any injuries.

8. Turn the lights off.
9. Wait to ensure the lightbulb is cooled down.
10. Do not touch the lightbulb as soon as you have turned it off; it is extremely hot.

11. Use a towel to unscrew the light bulbs clockwise from inside the hood or if it is cooled down completely you can use your bare hands.
12. If the bulb has been shattered, ensure that you are twisting the remaining parts carefully. Watch for sharp ends.

13. Check the information on the needed light bulb, then purchase a new one. The bulb is 40 W.
14. Often there is a sticker attached to the bulb with the information.

15. Insert the new lightbulb back and turn it to tighten it.