Ryobi CSB135L Guard Replacement

ID: 160297

Description: This guide will show you how to properly...

Steps:

  1. Remove the central 6mm hex nut and two black washers using a 6mm allen wrench.
  2. Remove the old blade.
  3. The blade has already been removed from this device.
    4. Step image Step image
  4. Remove the M5 x 20 mm screw using a Phillips screwdriver.
  5. Remove the black rubber stopper.
  6. This allows for 360 degree rotation of the guard.
    7. Step image
  7. Remove the four M4 x 16 mm screws holding the blade guard on using a Phillips screwdriver.
  8. Rotate the guard as necessary to gain access to all the screws.
    9. Step image Step image
  9. Remove the guard setup
  10. Adjusting the blade depth to allow more room near the guard housing can help with the removal
    11. Step image
Back