How to Remove the Top Panel of Your Whirlpool WED87HED Dryer Prereq

ID: 160314

Description:

Steps:

1. Before you begin your repair, unplug your dryer.
2. Your power cord may have four prongs rather than three. The additional prong is a ground connection.

3. Throughout this guide, keep track of each screw and reinstall it exactly where it came from.
4. Use a 5/16 inch nut driver to remove the two 15.7 mm-long screws securing the top panel to the rear panel bracket.

5. Grasp the top and slide it 1/2 to 1 inch toward the rear of the machine.

6. Lift the top panel upward to separate it from the chassis.
7. Remove the top panel from the machine.