HP 15-bs051od Screen Replacement

ID: 160355

Description: This is a guide for replacing the screen for...

Steps:

  1. Start with the laptop face down.
  2. Remove the eight 6 mm Phillips head screws securing the lower case.
    3. Step image
  3. Use the opening tool to pry the lower case away from the body of the laptop.
  4. Remove the lower case.
    5. Step image Step image
  5. Pull the RAM-retaining arms away from the RAM chip.
  6. The RAM chip should slightly "pop" up from it's socket.
    7. Step image Step image Step image
  7. Pull the RAM chip out of its socket.
  8. Our device does not specifically have a second RAM chip, but make sure to remove the second RAM chip below the first RAM chip.
  9. Repeat this process for the second RAM chip.
    10. Step image Step image
  10. Remove the four (4 mm) Phillips screws on the heatsink.
  11. Remove the exhaust by carefully lifting it up.
    12. Step image Step image Step image
  12. Disconnect the connecting cable of the fan and remove the fan.
    13. Step image
  13. Pull the red, white, black, and blue cable directly out of its port.
    14. Step image Step image
  14. Slide the left speaker out.
    15. Step image
  15. Pull the black and red cable connecting both speakers out of its secure fastening.
    16. Step image
  16. Pull the right speaker out by sliding from left to right.
    17. Step image
  17. Locate the motherboard.
  18. The motherboard is the biggest blue-colored surface located inside the computer.
  19. Locate the six ribbon cables.
    20. Step image Step image
  20. Flip up the ZIF lock bars that keep the six ribbon cables in place.
  21. Slide the rest of the ribbon cables out of their fastenings.
    22. Step image Step image
  22. Remove the four (4 mm) Phillips screws securing the motherboard.
    23. Step image Step image
  23. Remove the single (4 mm) Phillips screw on the Wi-Fi card.
  24. Slide the Wi-Fi card out of its port.
    25. Step image Step image
  25. Unfasten the connecting cable.
    26. Step image Step image
  26. Remove the display cable.
    27. Step image Step image
  27. Lift up the motherboard.
    28. Step image
  28. Remove the following Phillips screws:
  29. Five 7 mm screws on the display hinge.
  30. One 3 mm screw.
    31. Step image
  31. Partially open the laptop and remove the base.
    32. Step image
  32. Use the opening tool to carefully separate the screen cover from the screen.
  33. Use the opening tool to carefully remove the adhesive screen bezel from around the screen.
    34. Step image Step image
  34. Remove the following Phillips screws:
  35. Two 4 mm screws from the top of the screen.
  36. Two 4 mm from the bottom of the screen.
    37. Step image
  37. Carefully lift the screen from the display assembly without disconnecting the display cable.
    38. Step image
  38. Remove the display cable from the back of the screen.
    39. Step image
  39. Remove the screen from the display assembly.
    40. Step image
Back