KYVOL CYBOVAC E20 Front Bumper Replacement

ID: 160411

Description: The Kyvol Cybovac E20 contains a front bumper...

Steps:

  1. Start with the vacuum on a flat surface.
  2. The power button should be on the side closest to you.
    3. Step image
  3. Flip the vacuum over so the bottom is facing up.
  4. The dust bin should be on the side furthest from you.
  5. Remove the eight 1 mm screws holding the bumper in place using a Phillips #00 screwdriver.
    6. Step image Step image
  6. Remove both sides of the bumper and replace them with new ones.
    7. Step image Step image
Back