Razer BlackShark V2 Ear Cushion Replacement

ID: 160514

Description: If your Razer BlackShark V2 foam ear cushions...

Steps:

1. Place the headset so that the left side is facing you.
2. The left side of the headset has the cable attachment and the volume control knob.

3. Scoop your middle and ring finger underneath the top or bottom inner portion of the ear cushion.
4. You should feel a hard plastic ridge.
5. Pull from the hard plastic ridge, being sure not to pull from the soft cushion.
6. Slowly apply pressure to prevent damage.

7. Pull from the hard plastic ridge, being sure not to pull from the soft cushion.
8. Slowly apply pressure to prevent damage.

9. Once the cushion is removed, make sure the hard plastic base with the clips is attached to it.
10. If you are replacing both ear cushions, repeat Steps 1-4 for the other side. Then, insert the new ear cushions by lining up the clips in their respective holes and applying even pressure until they audibly click.