Huawei Media Pad M3 Lite Display Replacement

ID: 160541

Description: Use this guide to replace a broken or defective...

Steps:

1. Choose a side of the tablet to start; i took the one with the home button and heat it with the iOpener
2. Heat up the rest of the tablet

3. Put the suction handle roughly where the home button is and try to lift the display so you can slide with a pick between the display and the back cover. Be paitent it may take a while.
4. Take a second pick and try to get between display and the back cover
5. Once you are in with this pick move the pick from the middle to one of the edges

6. Take the next pick and move it to the next corner of the tablet

7. Insert another pick and move along the whole side of the tablet up to the next edge of the tablet

8. Same procedure as on the other sides. Take another pick and move it to the next corner of the tablet

9. With the tablet in standard landscape orientation lift the display to the right.
10. Attention: There are cables on the right side connecting display and motherboard

11. Remove one screw from the battery connector plate
12. Remove two screws from the display connector plate

13. Use a pair of tweezers to remove the battery connector plate.
14. Use a spudger to disconnect the battery.

15. Use a pair of tweezers to remove the display connector plate
16. Use a spudger to disconnect the display