NuWave Brio 37001 Heating Plate Replacement

ID: 160808

Description: This guide demonstrates how to replace the...

Steps:

  1. Unplug your NuWave appliance and ensure it has not been used within the last 20 minutes so that it is properly cooled down. Following this guide with an appliance that is still hot or powered on may result in injury.
  2. Remove the basket from the NuWave's tray.
    3. Step image
  3. Rest your appliance upside down, with the digital screen facing your work surface.
  4. Take caution in flipping your appliance. Excessive force may cause components to break.
  5. Remove the six 12 mm screws located around the edge of the bottom lid using a Phillips #1 screwdriver.
  6. Remove four 10 mm screws using a Phillips #1 screwdriver.
    7. Step image Step image
  7. Use your finger to flip up each small metal tab located around the heating plate.
  8. The plate may fall when all tabs have been flipped up.
  9. Photos #2 and #3 both display an additional piece removed, which lines the edge of the basket area. Removing this is entirely unnecessary and included solely for the visibility of this guide.
    10. Step image Step image Step image
  10. After flipping each tab, remove the plate by pushing downwards on its surface.
    11. Step image
Back