TILT Scooter Wheel Replacement

ID: 160949

Description: Replacing a wheel on a TILT pro scooter is a...

Steps:

1. Flip your scooter upside down where the handle bars and wheels touch the ground to prepare the extraction of the wheel.

2. With the Y-tool, loosen up the screw by turning counter-clockwise.

3. Turn the scooter to the opposite side, and insert and push the Y-tool through the same hole where the screw was removed to extract the parts.

4. Insert the new wheel and adjust the optional 10mm hex nut to support the wheel's.
5. The 10mm hex nut helps keep the wheel from wobbling, if there was no nut then proceed to the next step.

6. Insert the axle from which ever side and the opposite side to help adjust the hex nuts as you insert the axle easily.

7. Insert the bolt and turn clockwise to tighten up the bolt.

8. Flip your scooter upside up and move your scooter around to detect any lose movement.
9. If there is no wobble. Congratulations, you have successful replaced your wheel!