2005 Honda CR-V Car Visor Replacement

ID: 160952

Description: This is a step-by-step guide on how to replace...

Steps:

1. Ensure that the car is parked and utilize the parking brake.
2. Press the switch on the left of the parking lever, pull it outwards, and release it when it is fixed and outward.

3. Remove the outer shell with a spudger.
4. When the outer shell is loose enough, remove it with your hand.

5. Remove the two 4.5 mm screws from the visor with a Torx screwdriver.
6. After removing the inner layer, the sun visor is now released.

7. Put the 4.5 mm screw removed in the previous step in the new sun visor.
8. Tighten the screw using a Torx screwdriver.
9. Also, note that the shape of the shell is aligned with the form of the hole in the roof.

10. Screw in the rest of the 4.5 mm screws back in the sun visor using a Torx screwdriver.
11. Ensure that the screws are tight.

12. Put the outer shell back on top of the inner shell.
13. Finally, ensure that the sun visor can be moved to the driver-side window and twisted upwards and downwards.