Ryobi P277 Trigger Replacement

ID: 161000

Description: This guide will instruct the user on replacing...

Steps:

1. Lay the device on its side.
2. Remove eight 5 mm screws using a TR10 Torx screwdriver.
3. Separate the two halves by pulling up on the top half.
4. The two halves are still attached, so use caution when opening the device.

5. Use a Phillips head screwdriver to remove this bracket.

6. Locate the red and black wires connecting the trigger to the motor.
7. Use a soldering iron to separate these wires from the trigger.
8. For soldering help, visit the How to Solder and Desolder Connections guide.