Google Pixelbook Go Left Charging Port Replacement

ID: 161173

Description: If your Google Pixelbook Go's left charging...

Steps:

1. Flip the device so that the back is facing up.
2. Peel the rubber stoppers off the top and bottom of the device.

3. Remove ten 3 mm screws from around the edge of the back panel using a T5 Torx screwdriver.

4. Use an iFixit opening tool to pry up the back panel cover.
5. There is an orange ribbon cable that connects the cover to the base, so don't separate the two pieces completely.
6. Remove the single 2 mm screw using a Torx T3 screwdriver.
7. Disconnect the orange cable from the base of the device.

8. Insert wisdom here.

9. Find the left side of the device by locating the white stickers
10. Remove the three pink screws using a T3 Torx screwdriver.

11. Carefully grab the silver tab and slide the left charging port out of the laptop.