KYVOL CYBOVAC E20 Wheel Replacement

ID: 163067

Description: If your KYVOL CYBOVAC E20 is having issues...

Steps:

  1. Remove both sweepers by pinching near the base of the brushes and pulling up.
    2. Step image
  2. Remove four 10 mm screws using a Phillips #00 screwdriver.
    3. Step image
  3. Lift the wheel to detach the tensioning spring. This step requires you to first press down on the wheel, then detach.
  4. Disconnect the wheel motor from the power supply.
  5. Repeat the process for the other wheel.
    6. Step image Step image Step image
Back