2018 Honda Fit Wiper Blades Replacement

ID: 165000

Description: Every car has to have the wiper blades replaced...

Steps:

1. Turn ON the car.
2. Turn on the windshield wipers until they are at the halfway mark on the windshield.
3. Without turning off the windshield wipers, turn OFF the car.

4. Place either cardboard or a floormat with the soft side on the windshield.
5. This will protect the windshield from any damage.
6. Raise the wipers until they no longer move.

7. Look for a button on the arm of the wiper near the "J" shaped hook and push it.
8. Slide the wiper blade off of the arm.

9. Install new wiper blades by squeezing the middle part until the latch opens.

10. Guide the wiper blade onto the "J" hook and close the latch.

11. Remove the cardboard or floormat from the windshield.
12. Carefully place the wipers back onto windshield.

13. Turn the car ON.
14. Turn wipers ON until they are back in the original position. Turn OFF the wipers.
15. Turn the car OFF.