USB 1020 Water Pump of DC 3.5-9V Replacement

ID: 165252

Description: It's time to change your water fountain's pump!...

Steps:

1. Unplug the USB-C cord from the fountain.
2. Only proceed with dry hands to prevent being electrocuted.

3. Carefully pull out the water pump by pulling the wire from the reservoir located at the back.

4. Detach the old water pump from the tube by gently pulling on the pump.

5. Adjust the water pressure and flow on the new water pump.
6. Shift switch to the right to lower the pressure and left to increase the pressure.

7. Connect the new water pump to the tube.
8. Make sure you hear a click sound to ensure the connection is secure.

9. Place the new water pump into the reservoir.

10. Plug in the USB-C cord to turn on the fountain.
11. Use dry hands to prevent being electrocuted.