Wall Anchor Replacement on Loose Toilet Paper Dispenser

ID: 165331

Description: Toilet paper dispensers are very useful house...

Steps:

1. First, remove the spring from the dispenser so we can remove the loose part.
2. This can be done by pressing the spring back towards the other side. Here, the anchors on the left holder is loose so that's what's going to be replaced.

3. Use a 3 mm flathead screwdriver to loosen the screw located at the bottom of the left holder.
4. This will remove the left holder which will give access to the drywall anchors

5. Use the Phillips #2 screwdriver to unscrew the drywall anchors out of the holes.
6. As the top screw is being unscrewed, we will do the same to the bottom one as well.

7. Insert the new drywall anchors in the wall holes by inserting it through the spaces of the mount.
8. Once the new drywall anchors are inserted, use the Phillips #2 screwdriver again to screw the wall anchors inside the holes. This will hold the anchors in place firm and tight.

9. Next, place the left holder back in place with the anchors.
10. After placing the holder back in place, use the 3mm flathead screwdriver to screw back the screw hold into the holder. This will hold the left holder tight and strong with the anchors.

11. Last, place the toilet paper in the spring and place the spring back between the holders and that is it. This is the full procedure of a drywall anchor replacement. Enjoy!