Epson BrightLink 450wi Power Cord Replacement

ID: 165396

Description: The power source is the part the Epson...

Steps:

1. Flip projector upside-down.
2. The panel cover for the power source is on the projector's left side when upside-down.

3. Begin unscrewing the two 11 mm screws that are attached to this cover plate. These screws will come loose and can be removed and placed in a safe location.

4. Once the screws are removed begin pulling the cover plate off gently.
5. It will come off in one smooth motion by pulling away towards the left of the projector.

6. Once the cover plate is removed, lift up the device and you will be able to see the plug for the power source.
7. To plug in, ensure the prongs on the plug are facing the right way to slot into the device power source port.