How to Clean a GE JCBS250DM2WW Glass Oven Door

ID: 165522

Description: This comprehensive guide provides step-by-step...

Steps:

1. Disconnect the oven from the power supply.
2. To prevent injuries, ensure that the oven is empty and cool.

3. Open the oven door.
4. Use the the 3/32" Allen wrench to remove the two 8mm x 2mm M2 hex screws.
5. When both screws are removed, the door will separate. Make sure to hold it so it doesn't fall.

6. The first glass panel is located on the bottom part as shown in the image.
7. Dip the soft sponge in the soapy water and gently rub the glass until there is no grease or spots.
8. Use a clean cloth to wipe the glass off so there are no streaks.

9. The second glass panel is located on the top.
10. Use the sponge to clean the glass with a soap solution and soft clean cloth to wipe the glass off.

11. For any hard remaining stains, make a paste of baking powder and water.
12. Mix three table spoons of baking power and two table spoons of water.
13. Use the sponge to apply it on the hard stains and let it rest for two minutes.
14. Use a soft cloth to wipe off the paste from the glass.

15. To reassemble the door, press bottom and top part of the door together.
16. Replace the hex screws using the 3/32" Allen wrench.

17. The oven door glass is now clean.
18. Be careful when reconnecting the oven to power.