Lenovo IdeaPad 330S-14IKB USB/SD Ports Replacement

ID: 166962

Description: While USB and SD ports themselves are rated to...

Steps:

1. Begin by placing your laptop upside down so that you can see the labels on the back.

2. Remove the 10 silver screws from the bottom of the laptop.
3. Keep these screws in a safe place like a magnetic board to keep them from getting lost.
4. (Silver, 5.8mm Phillips #0)

5. Carefully remove the back panel from the laptop.
6. Proceed slowly and use wedges to avoid damaging the panel.

7. Locate the USB/SD Ports in the top left corner of the laptop.

8. Remove the two black screws holding the USB/SD port in place.
9. (Black, 3.35mm Phillips #0)

10. Gently disconnect the black and red wires from the board.
11. Be sure not to pull too hard on the wires.

12. Remove the blue cable from the board.
13. Be sure not to pull too hard on the wires.

14. Remove your old USB/SD ports