Eufy RoboVac 11S Bumper Replacement

ID: 167041

Description: The front bumper of the RoboVac 11s is used to...

Steps:

  1. Turn off the RoboVac's power and flip it over onto a soft surface.
    2. Step image
  2. Using the Phillips screwdriver, remove the eight 5 mm Phillips screws from the top of the bumper.
  3. 4 screws on each long edge.
    4. Step image Step image
  4. Lift the bumper slightly and locate the cable connecting it to the main body. Unplug this cable.
    5. Step image
  5. Wiggle the bumper gently to detach it completely.
    6. Step image
Back