Install an Extension Cord Female Plug

ID: 167225

Description: This guide will help you learn how to install...

Steps:

1. Install an Extension Cord Female Plug is a relatively simple process that anyone can do at home. This is the cord that we will repair.
2. Disconnect the cable before carrying out any repair work.
3. Use a utility knife to cleanly cut from the middle and around the cable.

4. Use wire strippers to remove about 2 cm from the inner wires

5. Make sure you put the bottom cover of the female plug.

6. The green screw is for the (green wire), the gold screw is for the (black wire), and the silver screw is for the (white wire).
7. For green wire.
8. For black wire
9. For white wire.
10. Now when you have each wire inside the hole you tighten the three screws.

11. Electrical tape is optional.
12. Need to make sure both of the parts are lined up in the same directions.
13. Push both parts together and you would see the screws pop up.

14. Tightening the top three screws.
15. Also, need to tighten the two bottom screws.
16. Make sure you have one or two fingers in the back of the two screws so they pop up.

17. Test out.