Fender 68 Custom Deluxe Reverb Speaker Replacement

ID: 167265

Description: Replacing a speaker in a tube amp is a...

Steps:

1. Lay the amplifier face-down.

2. Remove both back plates by unscrewing eight 1.2 mm screws with a Phillips #1 screwdriver.
3. Keep track of the eyelets.

4. Remove the power stage vacuum tubes. Gently pull out the tube while simultaneously pressing down the metal holder.

5. Remove the positive and negative speaker connections and label them accordingly with a marker and painter's tape.

6. Remove the other side of the speaker connection from the internal speaker input jack.

7. Remove the reverb tank by unscrewing two 1.2 mm screws with a Phillips #1 screwdriver and unfastening the velcro by hand.
8. The wire must stay connected.

9. Remove the speaker by unscrewing four 1.2 mm screws with a Phillips #1 screwdriver.
10. Potential for device damage: Do not touch the front of the speaker when handling.