Samsung UBD-M8500 Outer Shell Replacement

ID: 167295

Description: If your Samsung UBD-M8500 is not functioning...

Steps:

  1. On the back of the device, remove the three 8.1 mm screws with a Phillips #1 screwdriver.
    2. Step image
  2. From the back lift the case of the device upwards then forward, releasing the clips from the front.
    3. Step image
  3. Using two fingers in a pinching motion, release the wire from the clip that is attached to the outer shell and disconnect it.
  4. Do not pull on the wires.
    5. Step image
  5. Remove the cover of the device.
    6. Step image
Back