Samsung UBD-M8500 Fan Replacement

ID: 167299

Description: If you're encountering overheating issues or...

Steps:

1. On the back of the device, remove the three 8.1 mm screws with a Phillips #1 screwdriver.

2. From the back lift the case of the device upwards then forward, releasing the clips from the front.

3. Using two fingers in a pinching motion, release the wire from the clip that is attached to the outer shell and disconnect it.
4. Do not pull on the wires.

5. Remove the cover of the device.

6. Remove the two screws on the back of the device, using a Phillips #1 screwdriver.

7. Grip the white fan connector and pull it directly out if its port.

8. Lift the fan out of the device.