2006-2013 Toyota Corolla Turn Signal Bulb Replacement

ID: 167388

Description: Is your signal light not working, and in need...

Steps:

1. Pull the hood release lever towards yourself until the hood pops.
2. Open and move the bonnet lever towards the left to completely release the hood.

3. Lift the prop and place it inside bonnet hole to keep the hood open.
4. The hood prop will be located towards the front of the engine.

5. Turn your wheel to the appropriate side to locate the signal light.
6. For the left signal light, you would turn your wheel inwards to the right. While for the right side turn your wheel inwards by turning left.

7. Pry off the clip under the wheel well using a flathead screwdriver.
8. Remove the lining by pulling it straight back.
9. Some cars are different and may need different tools. For example, some have nuts holding the liner so you'll need a wrench.

10. Twist the signal housing counter-clockwise until it releases.

11. With one hand grab the socket and with the other pull the bulb straight out of the socket.

12. Insert the new bulb into the empty socket place the signal light back into the housing and twist it clockwise to the original position.

13. Make sure your signal works properly by turning it on.