P47 Wireless Headphones Speaker Replacement

ID: 167728

Description: P47 Headphones are one of the cheapest...

Steps:

1. Set up your headphones in an accommodating space before you start the repair process.
2. Make sure you have a safe working environment.

3. Begin by preheating the solder iron before the repair.
4. Pry the speaker housing away.
5. Desolder the speaker connections.

6. Solder Iron can burn if the user is not careful.
7. Use the solder wire to hold the speaker wire in place if you do a solo repair.
8. Use the preheated iron and apply it to the solder wire, using only the tip and a small portion.
9. Once the solder wire melts, remove the solder iron and the unmelted solder wire. The melted solder wire will immediately cool off and stick in place.
10. Proceed to follow the same steps for the remaining bottom wire.

11. Make sure the wires do not loosen after they have been soldered.
12. Close the lid of the speaker after soldering the speaker wires.
13. Please turn on the headphones and make sure they are working correctly.