Visual Land Prestige 7G Speaker Replacement

ID: 167985

Description: The speaker can be replaced if it is damaged or...

Steps:

1. Lay your device face-down.
2. Use a Phillips #000 screwdriver to remove the two 4 mm screws next to the AUX port and microphone.

3. Pry open the back-plate using a Jimmy.
4. Do this by inserting the tool into the fine thin line between the back-plate and screen at each corner of the device.

5. Lift off the backplate using your hand.
6. If the backplate is stuck, repeat the previous step to ensure all the edges are free.

7. Take the soldering gun and place it on the black and red wires to melt the soldered conncetions.
8. Remove the speaker.