AuKing M8-F Motherboard Replacement

ID: 167987

Description: Use this guide to replace your motherboard for...

Steps:

1. Make sure that the device is unplugged from any power source before attempting any repairs.
2. Flip the projector on its opposite side.
3. Remove all six of the 11 mm screws on the base of the projector using a Phillips #1 screwdriver.
4. Remove the two 14 mm screws using a Phillips #1 screwdriver.

5. Carefully prop open the top of the projector.
6. To remove the cord that is attached to the top, carefully wiggle the cord out.
7. Remove the top lid.

8. Flip up the black locking flaps then remove the two ribbon cables.

9. Remove the two 9 mm screws using the Phillips #00 screwdriver.

10. Carefully disconnect the wires that are attached to the motherboard.
11. Remove the motherboard.