EVGA x17 Optical Sensor Board Replacement

ID: 168008

Description: If your EVGA x17 gaming mouse sensor is...

Steps:

1. Remove the mouse skates to reveal 5 screws.

2. Use a Phillips #00 screwdriver to remove the 5 screws that secure the bottom panel.

3. Remove the weight chamber cover.

4. Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.
5. You can also use an iFixit opening tool to pry open the bottom panel.

6. Remove the 2 screws to gain access to the sensor board.

7. Pop the optical sensor out and replace it.