JBL Charge 5 Passive Bass Radiators Replacement

ID: 168102

Description: Welcome to our guide for replacing passive bass...

Steps:

1. Ensure that the device is fully powered off and no cables are attached before proceeding with the repair.
2. This fabric cover is secured with plastic clips only. Depending on the model, the cover may be secured by both plastic clips and screws.
3. Insert the flat end of the Jimmy into the seam located between the fabric cover on the right side of the seam.
4. Pry upward on the fabric cover to release plastic clips on the right side of the seam.

5. Insert the flat end of the Jimmy into the seam between the fabric cover at the center of the seam and the left side of the seam.
6. Use the Jimmy to pry open the edge with the rubber texture, releasing the remaining plastic clips.

7. Use your hands to gently open the two halves of the casing and slide the fabric cover off of the interior housing.

8. Using a spudger, pry the radiator off of the frame of the device.
9. Repeat on the other side if necessary.