How to Make an Embroidered Patch Iron-On

ID: 168130

Description: Ready to turn your regular clothes into...

Steps:

1. Preheat your steam-iron to the cotton setting.
2. Iron will be hot! Set iron on a steady surface up-right to avoid accidental burning.

3. Lay the patch over the fusible adhesive paper.
4. Cut a piece of the adhesive paper slightly larger than the patch.

5. Flip the patch around.
6. Place the cut out adhesive paper with the glossy side up, on top of the flipped patch.

7. Lay the heated iron onto the patch and the fusible paper for 10- 20 seconds, or until the adhesive paper has attached to the entire back of the patch.

8. Cut off the fusible paper as close to the patch as possible.
9. Allow the patch to cool prior to cutting, this will result in a more secure patch.

10. Peel the paper backing off the patch.
11. Look for possible peeling or uneven adhesive attachment.

12. Once the adhesive backing is peeled, your patch is ready to be ironed onto clothing!